閥門選型熱門搜索關鍵詞：氣動球閥氣動蝶閥氣動閘閥電動球閥電動閘閥手動閥門

網站首頁產品展示Q47 固定球手動球閥Q47H-16C 手動法蘭固定球直通流道硬密封鑄鋼（WCB）球閥

Q47H-16C 手動法蘭固定球直通流道硬密封鑄鋼（WCB）球閥

概述
固定球閥的球體，采用上、下兩根閥桿固定，工作時，流體壓力不會使球體向閥座移動，閥座不會承受過大壓力而變形。
Summary
The sphere of Q47 type standing ball valve is fixed with upper and lower valve stems. When it works, for fluid pressure is unable to make sphere move towards valve base

sales@www.5yuet.cn

在線咨詢

產品圖：

可選配件：

概述

固定球閥的球體，采用上、下兩根閥桿固定，工作時，流體壓力不會使球體向閥座移動，閥座不會承受過大壓力而變形。閥桿部份設有自潤滑軸承，減少磨擦，開關扭距小，兩閥座均采用彈簧設預緊。密封采用聚氟乙烯鑲?cè)脘撊?nèi)，鋼圈后部設有彈簧，保證閥座緊貼球體。當閥門中腔壓力異常升高超過彈簧頂緊力，閥座后退脫離球體，達到自動泄壓效果，壓后閥座自動復位。結構的先進性使固定球閥的密封性能穩定操作省力，使用壽命長，極適用于長輸管線和一般管線。

Summary

The sphere of Q47 type standing ball valve is fixed with upper and lower valve stems. When it works, for fluid pressure is unable to make sphere move towards valve base, the valve base won't be deformed for enduring over pressure. There is self-lubricating bearing seton the part of valve stem to reduce friction, and its switch-torque is small. Both valve bases are pertensioned by setting spring. Referring to sealing, adopt the way to inset polytetrafluoroethylene into steel-ring with a spring on its rear end, which can ensure valve base cling to sphere. When the cavity pressure in valve transnormally excesses spring tension, valve base will back off and separate from sphere to get the effect of automatic pressure release.The valve base will automatically reset after being pressed. Thanks to advanced structure, the standing ball valve has stable sealing performance, labor-saved operation and long using life. It is es-pecially applicable for long conveymg pipeline and general pipeline.

結構·功能·特點Construction．Functio．Features.

全通徑設計

按照客戶的要求可以提供全通徑

或縮徑閥門，全通徑閥門具有與管子

內徑完全一致的通道直徑，減少渦流

便于清掃管道。

Full bore design

According to the customer's

demand,the fullbore orthe redu-

ced bore can be provided. The f-

ull bore valve has the diameter of

channel completely equalto the

in ner diameter of pipe to facilitat-

e to clean the pipe.

阻塞與排泄功能

固定球閥采用彈簧預緊，閥座密

封為雙活塞．利用話塞原理密封．上

下游側的閥座使流體阻斷．閥體中腔

裝放空閥排空，閥底裝有排污閥排污，

Block & Bleed Function

Fixed ball valve adopts spri-

ng to pretighten.And seat sealis

double pistons.lt adopts piston p-

rinciple to seaI.Upstr-Eam and d-

ownstream seats make fluid stop.

And the emptying valve installed

on the middle cavity is used to e-

mpty and the blowdown valve in-

stalled at the bottom of valve to c-

lear off dirt to facili-tate to clean

the pipe.

防火結構

萬一發生火災或異常升溫使PT

FE軟化燒損時，閥座支承圈防火密封

面可以和球體接觸．起到密封作用且

符合AP1607和AP16FA

Fire-proof structure

When the fire happens orthe

temperatue unusually rises to m-

ake PTFE soften to damage.the

fireproof sealsurface of seat su-

pported circle can contact with b-

all to have seal function.This co-

nforms to therequirements of A-

Pl 607 and AP16FA.

防靜電設計

采用鉻鎳不銹鋼的彈簧和小球使

球體、閥桿和閥體之間相互導電，從

而把靜電完全釋放。

Anti-static design

Chrome and nickelstainless-

teel spring and small ball are ad-

opted to make electroconductive

among ball. Stem and body to co-

mpletely releasestatic.

設計、制造標準

1、設計、制造按GB/T12237-89

2、連接法蘭JB/T 79-94

3、閥門檢查和試驗按GB/T13927-89

Standard for design and manufacture

1、DesignManafacfure According to GB/T 12237-89

2、FlangeDimensionAccording tojBfT 79-94

3、valve Check and Test According to GB/T 13927-89

主要零件材料Mater for main parts

公稱壓力Nominal PN(MPa)pressura

產 品型號Product Type

主要零件材料

Parts

Material

閥體

Body

WCB

ZG1Cr18Ni9Ti

CF8

CF3

ZG1Cr18Ni-

12Mo2Ti

CF8M

CF3M

球體、閥桿

Ball,Stem

2Cr13

1Cr18Ni9Ti

0Cr19Ni9-

（304）

00Cr19Ni11-

（304L）

1Cr18Ni12-

Mo2Ti

0Cr17Ni12-

Mo（316）

00Cr19Ni14-

Mo2（316L）

閥座

Seat

四氟乙烯、對位聚苯

適用工況

Applicable

Condrtion

適用介質

Applicable mediumt

水、蒸汽、油品等

Water，Steam，Oil

硝酸等腐蝕性介質

Netricalid Corrosive

強氧化性介質

Oxgen medium

醋酸等腐蝕性介質

Acetil acid coirosive medium

尿素等腐蝕性介質

Urea corrosive medium

工作溫度（℃）

Working

Temperatdre

-29~150(四氟乙烯) -28~300(對位聚葳)

試驗壓力

（MPa）

Test pressure

殼體

Shell

1.5培

密封（液）

Sesl（liquid）

1.1培

密封（氣）

Sesl（gas）

0.6MPa

蝸輪傳動 Turbine

在手動型號的Q后插“3”表示，示例：Q347F-16C Represeting by“3”inserted befere manual“Q”

氣動 Pheumatic

在手動型號的Q后插“6”表示，示例：Q647F-16C Represetingby“6”inserted befere manual“Q”

電動 Electric

在手動型號的Q后插“9”表示．示例：Q947F-16C Represeting by“9”inserted befere manual“Q”

附注 Remark

選用縮徑球閥，在公禰通徑數值后加S表示，示例：DN100S

Selecting reduce Bore,insert“S”affer figure of DN.

如用戶選用美標的閥門請?jiān)谛吞?hào)前加A．選用的壓力為150Lb、300Lb、600Lb。

PN1.6MPa主要連接及外形尺寸Main connection and extemal dimensinos（mm）

DN	D1	L	H	手動Manual operaten					電動 Electromotor Operated		氣動 Pneumatic Operated		法蘭連接尺寸 Flange connection dimension
DN	D1	L	H	H1	E	F	W	Wt(kg)	H2	L1	H3	L2	D	D1	D2	b	f	Z--φd
25	25	165	50	75			160	4.5			215	200	115	85	65	14	2	4-φ14
32	32	180	55	85			160	5.7			240	270	135	100	78	16	2	4-φ18
40	40	190	80	95			230	7.0			264	270	145	110	85	16	3	4-φ18
50	50	216	102	107			230	12			274	270	160	125	100	16	3	4-φ18
65	65	241	114	125			400	16			379	405	180	145	120	18	3	4-φ18
80	80	283	127	152			400	22			389	405	195	160	135	20	3	8-φ18
100	100	305	152	178			650	35			479	576	215	180	155	20	3	8-φ18
125	125	356	184	300			1050	58			552	576	245	210	185	22	3	8-φ18
150	150	394	219	330			1050	74	554	235	666	776	280	240	210	24	3	8-φ23
200	200	457	273	398	116	350	600	205	600	235	736	776	335	295	265	26	3	12-φ23
250	250	533	360	495	116	350	600	322	652	235	926	776	405	355	320	30	3	12-φ25
300	300	610	395	580	171	400	800	460	760	259	1059	1060	460	410	375	30	4	12-φ25
350	337	686	430	625	171	420	800	576	770	400	1127	1060	520	470	435	34	4	16-φ25
400	387	762	470	670	257	400	800	864	830	400	1393	1360	580	525	485	36	4	16-φ30
450	438	864	550	698	257	420	800	1280	-	-	1468	1360	640	585	545	40	4	20-φ30
500	489	914	580	840	257	400	800	1600	940	410	1538	1360	705	650	608	44	4	20-φ-34
600	591	1067	700	1050	150	410	800	3540	1020	410	1370	2840	840	770	718	48	5	20-φ41
700	686	1245	800	1100	83	650	800	4500	1115	410	1450	2840	910	840	788	50	5	24-φ41

PN2.5MPa主要連接及外形尺寸Main connection and extemal dimensinos（mm）

DN	D1	L	H	手動Manual operaten					電動 Electromotor Operated		氣動 Pneumatic Operated		法蘭連接尺寸 Flange connection dimension
DN	D1	L	H	H1	E	F	W	Wt(kg)	H2	L1	H3	L2	D	D1	D2	b	f	Z--φd
25	25	165	50	75			160	4.5			215	200	115	85	65	16	2	4-φ14
32	32	180	55	85			160	5.7			240	270	135	100	78	18	2	4-φ18
40	40	190	80	95			230	7.0			264	270	145	110	85	18	3	4-φ18
50	50	216	102	107			230	15			340	405	160	125	100	20	3	4-φ18
65	65	241	114	125			400	24			379	405	180	145	120	22	3	8-φ18
80	80	283	127	152			400	30			452	574	195	160	135	22	3	8-φ18
100	100	305	152	178			650	55			479	574	230	190	160	24	3	8-φ23
125	125	356	184	300			1050	87			646	756	270	220	188	28	3	8-φ25
150	150	394	219	330			1050	118	235	74	666	756	300	250	218	30	3	8-φ25
200	200	457	273	398	116	350	600	255	235	350	814	1060	360	310	278	34	3	12-φ25
250	250	533	360	495	116	350	600	370	400	350	1002	1060	425	370	332	36	3	12-φ30
300	300	610	395	580	171	400	800	533	400	420	1059	1060	485	430	390	40	4	16-φ30
350	337	686	430	625	171	420	800	640	410	420	1150	1360	550	490	448	44	4	16-φ34
400	387	762	470	670	257	400	800	1030	410	400	1205	1360	610	550	505	48	4	16-φ34
450	438	864	550	698	257	420	800	1542	-	-	1250	2840	660	600	555	50	4	20-φ34
500	489	914	580	840	257	400	800	2100	420	400	1295	2840	730	660	610	52	4	20-φ41
600	591	1067	700	1050	150	410	800	4200	690	410	1390	3300	840	770	718	56	5	20-φ41
700	686	1245	800	1100	83	650	800	5300	690	650	1470	3300	955	875	815	60	5	24-φ48

PN4.0MPa主要連接及外形尺寸Main connection and extemal dimensinos（mm）

DN	D1	L	H	手動Manual operaten					電動 Electromotor Operated		氣動 Pneumatic Operated		法蘭連接尺寸 Flange connection dimension
DN	D1	L	H	H1	E	F	W	Wt(kg)	H2	L1	H3	L2	D	D1	D2	D6	b	F1	Z--φd	f
25	25	165	50	75			160	4.5			200	200	115	85	65	58	16	4	4-φ14	2
32	32	180	55	85			160	5.7			270	270	135	100	78	66	18	4	4-φ18	2
40	40	190	80	95			230	7.0			270	270	145	110	85	76	18	4	4-φ18	3
50	50	216	102	107			230	15			405	270	160	125	100	88	20	4	4-φ18	3
65	65	241	114	125			400	24			405	405	180	145	120	110	22	4	8-φ18	3
80	80	283	127	152			400	30			574	405	195	160	135	121	22	4.5	8-φ18	3
100	100	305	152	178			650	55			574	574	230	190	160	150	24	4.5	8-φ23	3
125	125	381	184	300			1050	87			756	574	270	220	188	176	28	4.5	8-φ25	3
150	150	403	219	330			1050	118	235	74	756	756	300	250	218	204	30	4.5	8-φ25	3
200	200	502	273	398	116	350	600	255	235	350	1060	756	375	320	282	260	38	4.5	12-φ30	3
250	250	568	360	495	116	350	600	370	400	350	1060	756	445	385	345	313	42	4.5	12-φ34	3
300	300	648	395	580	171	400	800	533	400	420	1060	1060	510	450	408	364	46	4.5	16-φ34	4
350	337	762	430	625	171	420	800	640	410	420	1360	1060	570	510	465	422	52	5	16-φ34	4
400	387	838	470	670	257	400	800	1030	410	400	1360	1360	655	585	535	474	58	5	16-φ41	4
450	438	914	550	698	257	420	800	1542	-	-	2840	1360	680	610	560	524	60	5	20-φ41	4
500	489	991	580	840	257	400	800	2100	420	400	2840	1360	755	670	612	576	62	5	20-φ48	4
600	591	1143	700	1050	150	410	800	4200	690	410	3300	2840	890	795	730	678	62	6	20-φ54	5
700	686	1346	800	1100	83	650	800	5300	690	650	3300	2840	995	900	835	768	68	6	24-φ54	5

PN6.4MPa主要連接及外形尺寸Main connection and extemal dimensinos（mm）

DN	D1	L	H	手動Manual operaten					電動 Electromotor Operated		氣動 Pneumatic Operated		法蘭連接尺寸 Flange connection dimension
DN	D1	L	H	H1	E	F	W	Wt(kg)	H2	L1	H3	L2	D	D1	D2	D6	b	F1	Z--φd	f
50	50	292	114	108	116	350	600	23			340	405	175	135	105	88	26	4	4-φ23	3
65	65	330	124	155	116	350	600	35			-	-	200	160	130	110	28	4	8-φ23	3
80	80	358	133	197	116	350	600	49			-	-	210	170	140	121	30	4	8-φ23	3
100	100	406	159	235	116	350	600	91			479	576	250	200	168	150	32	4.5	8-φ25	3
150	150	495	250	300	116	350	600	192	554	235	666	756	340	280	240	204	38	4.5	8-φ34	3
200	200	597	294	374	171	420	800	355	574	235	895	1060	405	345	300	260	44	4.5	12-φ34	3
250	250	673	395	445	171	420	800	640	731	400	1002	1060	470	400	352	313	48	4.5	12-φ41	3
300	300	762	445	512	257	400	800	880	771	400	1059	1360	530	460	412	364	54	4.5	16-φ41	4
350	337	826	500	550	257	400	800	1100	867	410	1160	1360	595	525	475	422	60	5	16-φ41	4
400	387	902	530	615	257	400	800	1540	805	410	1250	2840	670	585	525	474	66	5	16-φ48	4
500	489	1054	660	810	150	410	800	2800	979	420	1320	2840	800	705	640	576	70	5	20-φ54	4
600	591	1232	800	1010	83	650	800	5300	1085	690	1470	3300	930	820	750	678	76	6	20-φ58	5